Stiffness analysis

Tento článek je dostupný také v dalších jazycích:
In every structure, the distribution of the internal forces depends on the stiffness of its members. IDEA StatiCa can help you determine the stiffness of the joint and thus validate the global model setup. The following article collects the main information you need to know about stiffness analysis.

Use stiffness analysis in IDEA StatiCa Connection to determine whether the joints are pinned, semirigid, or rigid. The classification of the connection follows the selected national standard.

As a result of the stiffness analysis, you will get the moment-rotation diagram and a table with several values. Based on the curve and a selected standard, the joint is assigned with the 

  • pinned
  • rigid
  • semirigid class.
tuhost přípojů - výsledky

Further parameters have to be set to analyze the stiffness properly

  • theoretical length of the member 
  • proper load
  • braced frame parameter

There are several sources of information to read about this type of analysis. We recommend reading the general part of the Theoretical Background, the blogpost Why bother with connection stiffness and/or watching one of our webinars on the topic (see below).

To combine the stiffness results with your global FEA model, go through Connection stiffness and its use in global analysis article and/or watch How to put rotational stiffness into your FEA model video.

At the end of the article, you can find several step-by-step tutorials.

Model for stiffness evaluation

To evaluate the rotational stiffness kjoint of the connection itself and the corresponding rotation θ2, we subtract the part of the stiffness assigned to the deformation of members θ1 from the overall deformation θtot.

The rotation of members θ1 is evaluated on the model with ideally rigid connections among all members. The overall rotation θtot is evaluated on the model with real manufacturing operations.

The results obtained from the stiffness analysis correspond to the kjoint and θ2.

Theoretical Background

Read the essential information about stiffness analysis in our Theoretical Background. The above-mentioned settings are described in the general part of it.

The general part of the Theoretical Background about the stiffness analysis and its results:

Stiffness analysis and deformation capacity of steel joints

Specific parts of the Theoretical Background for each of the supported national standards:

Other articles on connection stiffness and verifications

You can find more detailed information and some verification studies in the following articles. Some of them are part of the book "Benchmark Cases for Advanced Design of Structural Steel Connections" written by prof. Wald and his team. 

Tuhost přípoje a její využití v globální analýze

Webinars and videos

In the past, we have held several webinars on the topic of the stiffness of the connection. Also, some other videos describe how to work in the application. You can find inspiration from real-life projects as well as hints for setting up your computational models correctly.

Connection Wednesdays - Stiffness classification

In this webinar, we briefly review the code requirements related to stiffness classification. Afterward, we endeavor to design the connections of an actual frame that will be initially designed as moment resisting. We employ a semi-rigid configuration and subsequently apply the predicted behavior to the global analysis structure. Throughout this process, we explore common questions and assess their impact on the design.

Connection Wednesdays - Game-changing joint stiffness analysis

During the webinar, you will see the whole workflow of modeling, loading, and code-check of one interesting steel joint. 

Connection Wednesdays - Residence in Ružomberok joint

Platform joints should usually be pinned, but what if the reality is not so simple? How to input the joint stiffness analysis correctly? See the frame joint stiffness analysis and consequences of the stiffness to FEM model.

How to put rotational stiffness into your FEA model

The stiffness of the joint is a significant and indispensable factor in the design of the global structure for semirigid connections. The question is, where can I calculate the stiffness of the joint, and what stiffness should be used for my design? 

Design and code check of joint from Jakarta velodrome

The following webinar recording explains how the stiffness analysis diagram is constructed, what the settings are, and what results you will get.

Updates in versions

The following features are part of our release notes of IDEA StatiCa and may be related to the stiffness analysis. Read more about the features in the dedicated articles under the link. 

Rotational capacity limited by bolt and weld failure (Stiffness analysis) (version 21.0)

Export of moment-rotation curve to CSV and DXF (version 22.0)

Export zatěžovací křivky do CSV a DXF

Tutorials

We have created step-by-step tutorials to set up the model and run the analysis. Find the links to them below:

Stiffness analysis of a steel connection (EN)

Stiffness analysis of a steel connection (AISC)

Rotational stiffness of a haunched beam

Related articles

Proč řešit tuhost přípojů

Boulení - důležitá součást posuzování přípojů

Tuhost přípoje a její využití v globální analýze