Knihovna článků
Detailing of bolts and welds according to Chinese standard
Ocel
Connection
CBFEM
Bolts
Svar
GB (Čína)
Bolts
The minimum allowable distance of bolts is checked according to Table 11.5.2.
Minimum allowable distance of bolts; d0 – bolt hole diameter
| Minimum allowable distance | |
| Bolt pitch | \( 3 \cdot d_0 \) |
| End distance parallel to load | \( 2 \cdot d_0 \) |
| Edge distance perpendicular to load (bearing bolt type) | \( 1.2 \cdot d_0 \) |
| Edge distance perpendicular to load (preloded bolt type) | \( 1.5 \cdot d_0 \) |
Welds
The minimal weld size hf is checked according to Table 11.3.5. The weld size is determined from weld throat thickness: \( h_f = \sqrt{2} \cdot h_e \).
Minimal weld size hf
| Thickness of plate [mm] | Minimum weld size [mm] |
| \( t \le 6 \) | 3 |
| \( 6 < t \le 12 \) | 5 |
| \( 12 < t \le 20 \) | 6 |
| \( 20<t \) | 8 |