Support Center

Esempi progetti

Sample projects for prestressed concrete design

Concrete

RCS

Questo articolo è disponibile in:

Choose from the list of prestressed concrete sample projects. You can download them and adapt to the needs of your project.

Calculation of Prestressed reinforced concrete beam with the openings the lenght 24m. All checks provided. Designed according EN code in IDEA Statica Detail. — Prestressed 24 m beam with openings

Download

Haunched prestressed roof girder

Download

This model presents an advanced design of a Concrete Composite Prestressed Slab with a total length of 3.55 meters. It includes detailed calculations of the construction stages, incorporating time-dependent analysis (TDA), and a comprehensive code check. The design adheres to EN standards and was developed using IDEA StatiCa BEAM. — Prestressed 18.5m beam with openings

Download

This demonstration presents a potential beam design featuring a notably interesting and unconventional arrangement of openings. It involves the calculation of a dapped end T-beam with openings along its 10-meter length. Comprehensive checks of the openings have been conducted, and the design is compliant with EN standards, utilizing IDEA StatiCa DETAIL for analysis. — Prestressed 18.5m beam with openings

Download

This analysis focuses on the load-bearing wall with the window opening in the façade and the cantilever. The wall is designed to support the loads transmitted from the roof, which highlights the importance of structural integrity in this configuration. Code-check calculation according to EN code in IDEA StatiCa Detail. — Vertically Loaded Basement Wall

Download

An Example of calculation of the model Concrete Reinforced Vertically Loaded Basement Wall in IDEA StatiCa DETAIL according to ACI (metric units) code. The total length of the wall is 20m. The wall is loaded by a columns. Code-checking of the discontinuity region. — Vertically Loaded Basement Wall

Download

Analyses of behavior inverted T beam, which is supported by Patch Support. Calculated in IDEA StatiCa DETAIL. — Prestressed 18.5m beam with openings

Download

An Example of calculation the model of Concrete Reinforced Prestressed T-Beam, total lenght 25 m. Calculated according EN code in IDEA StitaCa Detail. — Prestressed 18.5m beam with openings

Download

Designing a post-tensioned concrete bridge model with 3 spans. Designed according to EN code. IDEA StatiCa BEAM. — Prestressed concrete bridge

Download

Prestressed Composite Section — Prestressed Composite I Profile Section

Download

Box girder bridge section

Download

Calculation of the inclined reinforced concrete prestressed hammerhead pier cap model. IDEA StatiCa Detail. EN Design code. — Prestressed Hummerhead Pier Cap

Download

Prestressed cross joint — Prestressed cross joint (Detail)

Download

Prestressed beam with openings in IDEA StatiCa — Prestressed beam with openings

Download

Prestressed T-section in IDEA StatiCa — Prestressed concrete I-section (RCS)

Prestressed I-section

Precast hollow core slab

Download

Continuous composite bridge

Download

Prestressed box girder bridge

Download

Pretensioned hollow-core beam

Download

Pretensioned saddle beam

Download